Yamaha FZ09 14-15 Gauge Relocation Kit
Yamaha FZ09 14-15 Gauge Relocation Kit
|04-BH620Z||1||Button Head Socket Cap M6x20 Z screw|
|04-LN6Z||1||Locknut M6-1.0 Nylon Insert- Zinc(shift and brake pedals)|
|04-SP18B||1||04-SP1/8 1/2x1/8 Round Spacer - Black|
All prices, products, and terms are subject to change without notice. Orders are accepted based upon prices and terms in effect at the time of shipment. Acceptance of shipment constitutes acceptance of these terms.
If you’ve ordered an item that is out of stock, you will be contacted within one business day and advised of a delivery date estimate.
All new accounts will be set up either prepaid by credit card, Paypal, or other pre-approved arrangements. All orders will be shipped prepaid unless other arrangements have been authorized. Personal checks are not accepted. Credit card orders must be shipped to the billing address of the credit card.
All orders will be shipped by UPS, FedEx or USPS ground unless otherwise specified. It is the responsibility of the buyer to keep Woodcraft Technologies, Inc. informed of any address changes in writing. Any charges incurred as a result of a failure of the customer to inform Woodcraft Technologies, Inc. of these changes will be the sole responsibility of the customer.
Woodcraft does not guarantee that orders will ship the same day they are placed. If you have a time sensitive order, please call us so we can discuss all your options.
INTERNATIONAL CUSTOMERS ARE RESPONSIBLE FOR ANY APPLICABLE BROKERAGE FEES OR CUSTOMS CHARGES. Click Here to learn more about our International Shipping policy.
Woodcraft Techologies, Inc. will evaluate each return with discretion to determine the best course of action. No returns will be accepted without prior approval from a Woodcraft Technologies, Inc. employee. Returns must be accompanied with a return authorization (RA) number and must be sent back in new and saleable condition, including all product packaging. No returns will be accepted on close-out or special order items. All returns must be authorized within thirty (30) days of receipt of order.
All items sold by Woodcraft Technologies, Inc. are intended for racing use and may render some vehicles illegal for street riding in some States. The purchaser is responsible for familiarity with the local and national laws pertaining to the use of any Woodcraft Technologies, Inc. products. The purchaser of any part releases the manufacturer of those parts and Woodcraft Technologies, Inc. from all liabilities pertaining to the use of the parts. The purchaser recognizes that any modifications to any motorcycle can increase the risk of an accident and/or injury and may also render the motorcycle illegal for use on public roads. Installation of all Woodcraft Technologies, Inc. products should be performed by trained professionals.
Woodcraft Technologies, Inc. Authorized Dealers assume full responsibility for the disclosure to the customer of all state and federal laws pertaining to the use of these products on public roads. Many Woodcraft products are designed for racing use only and it is the responsibility of the dealer to recognize the intended use of the product and advise the customer accordingly.
Installation and use of some Woodcraft Technologies, Inc. products will change the response of the motorcycle to rider control inputs. Failure of the rider to adapt to these changes may cause loss of control and serious injury or death. Improper installation and/or failure to comply with all warning and instructions may cause a loss of control and serious injury or death. Do not install or use any Woodcraft Technologies, Inc. product if you are unable to do so in compliance with all of the instructions and warnings. See the assistance of a trained professional technician.
The product works very well. I actually ended up with the 1.5 inch adjustable risers. The staff person who worked with me was a racer and spent a good hour talking to me about body position and what I was looking to accomplished. I forget his name but he definitely went above and beyond my expectations in terms of finding me a solution to my problem instead of selling me a product.
These bar adapters are awesome. I hated the upright position of the ninja 650. These bar adapters gave me just what I needed to enjoy riding this bike. It’s more sporty and natural feeling. The shipping price was great and they arrived within 3 days. Installation was easy and quick. The hardest part was drilling the wholes needed for the controls but once you determine where they’re needed it’s simple. I would recommend this to anyone who wants a more laid down position on the bike. 5*
Clip on shipped fast, but more importantly, fit beautifully. I would advise anyone considering Chinese cheapies to spend the extra dough on these nice clip ons. Design is great, and again they fit on the forks and clamp on with confidence. I am proud to display my Woodcraft sticker on my toolbox. Thank you Woodcraft!
Besides the high price no complaints here! This hardware is well machined and finished, pleasing to feel/touch. I appreciate the simple vacuum formed/sealed packaging, makes for easy recycling. Initially had some difficulty removing the bar end plugs but vice grips clamped to the table proved to be the best solution, marred the plastic bits tho. Got the bar end sliders with room for a lever guard anyways so figured it was ok, probably not going to ever need the standard plugs (just like to preserve quality when possible). When assembling totally scratched the riser but was minor on the surface and came off with light rubbing! Fit to the fork tubes is solid and at hand tightened was sung, bars won't slip from gravity. Tightened snug I could gently move from full lock to full lock without slipping the bar position. Marks on the clip on top surface also help with alignment!! FYI the instructions recommend using blue (medium strength) locktite on some of the hardware, I suggest you purchase before parts arrive for convenience (if don't already have some). Working at a relaxed pace think it took me about 4.5 - 6 hrs to finish (mostly) installation, had old bars removed before hand. I had to do minimal fabrication of new brackets to hold my display and a guard (from wire hanger) to contain break line and throttle/clutch cables to prevent binding and ensure full lock to full lock nothing got caught or collided. Holes need to be drilled to attach the button/switch controls/clusters and even with a punch to mark my hole I still managed to slip around a lot, thankfully the controls hide the mess but a drill press and proper clamping can go a long way if you desire perfection. (Perfection is the enemy of Action - from a Ted Talk) I rode around without a left grip for a couple of days and despite more vibration in the hand I was surprised to find my hand did not slip, gloves probably helped with grip. It was an acquired look but could fly if you don't reuse the old grips or purchase new grips. I got a bicycle grip for my left bar that has screw to tighten secure and that works really well, makes for easy grip removal if need and is comfortable pattern. Had to cut off the end tho to fit bar end slider but a fair trade-off for protection. I'm riding a 2006 DL 650, although not many woodcraft products "officially fit" (Rear sets pls??) for this bike these clipons seem to be doing fine. Have put on about 230+ miles (at the time of writing this) with these clipons and I feel confident in their performance. I did drop my bike the second day after installing, parked not well on a slope in the dark and walked away, tipped over almost instantly, rip. But the bar ends and some frame sliders (and dirt) protected the important parts and the handle bar didn't bend, I think it might have slipped a tiny bit like 1/8th" because it felt ever so slightly different after riding away but could not get the bars to slip again and double checked all the bolts and they seemed fine. To make the clipons fit I had to extend the fork tubes about 40mm out of the top triple clamp to make an attachment point, the extra height is need to not hit stock gas tank. To be noted the steering geometry has been effected due to rake/trail changing. The turn-in rate is quicker but not too quick to be bothersome when filtering/in traffic. I would say the bike is 3% sportier now. With the 3" risers the bar height is similar to stock but your body position is more leaned forward due to the fork tubes being in-front of where the stock bars mount. In theory, based on eyeballing the bar distance to tank collision I think at a minimum the 2" risers could work on the DL 650 (assuming fork tubes are raised the needed amount). There may be a collision with the stock headlights/cowlings and definitely one with the stock display hence the bracket fabrication. I initially bought the no rise/flat clipons on a whim and AFFLUENZA attack thinking I could make them work but I was wrong, sort of. The only way to make the bars not collide with the tank is if they are positioned perpendicular to the direction of the front wheel, or straight across, but that Is extremely uncomfortable and an impractical riding position for this bike, unless you want back and wrist pain (loose arms no Lion king syndrome). But that is my opinion I would measure for yourself. If you were to remove the stock headlight assembly and custom fabricate a new one that is positioned under the height of the top triple clamp I think you could have a rad setup and the flat/low riser bars may work with slightly less inconvenience? Full lock to full lock I have about 1.5" clearance from the closest part of the bar to the closest part of my gas tank, and a finger can get slightly pinched if your not holding high enough on the grips. From the levers to the headlight cowling I have about 2-3" of space, proper lever operation is my priority. The angle of the bar is probably in the m