Clipon Adapter Plate w/ Long Black Bars Yamaha FZ-10 2017, MT-10
- Description
- Spare Parts
- Q&A
- Fitment
Our adapter plate set up for the Yamaha FZ10 bolts directly to the stock handlebar mount keeping all of the stock clearances- while putting your hands in a more natural position. Many models have the option to flip your adapter plate upside down- which results in a more aggressive riding position that improves both traction and feel. Most models also allow the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort. Each plate is machined from tough 6061-T6 billet aluminum- giving your bike a custom look and making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash.
The following measurements give an approximate height in each configuration in relation to the stock bars.
3 inch riser UP Appx Stock Height
2.5 inch riser UP Appx ½ inch drop
2 inch riser UP Appx 1 inch drop
1.5 inch riser Cannot be used
1 inch riser UP Appx 2 inch drop
1 inch riser Down Appx 3.25 inch drop -- ONLY AVAILABLE for 2017-2021 MT-10
1 INCH STANDARD RISE
2 INCH STANDARD RISE
2.5 INCH STANDARD RISE
3 INCH STANDARD RISE
- Reviews
- Questions
United StatesAbsolutely amazing product, but I want more
These pieces are milled to such a tight spec that you could run them without the bolts (not necessarily recommended) but they change so much, that you kind of need to make changes. Your brake line is too long, your clutch will hit, and the brake res is definitely in the way. None of these problems are the fault of woodcraft, but I would like if I could buy the brake res and brake lines modified for this swap on their site. Or, a little extension piece to shove the fairing stay out an inch or so, so you can have proper clearance. Woodcraft did an amazing job, but there are more pieces of the puzzle that are needed
United StatesJust what I needed!
If you’re on the fence like I was, just get them. They’re totally worth it. Great quality, and changed the feel of the ride exactly how I wanted them to. Highly recommend
MT10 Handlebar
Item is great, high quality. Delivery is fast Only issue is im unable to lock my handle after the installation. The position after installation makes the left switch hit the tank
United KingdomWoodcraft mt10 clipon plate review
Purchased this kit as I didn’t like the upright riding position of my mt10 , the kit is easy to fit doesn’t take long probably about an hour or so , there are a few tweaks you have to do for it to fit with no fowling of tank and clocks , 1st is you have to rotate the master cylinder banjo bolt 90 degrees ( just slowly undo but only enough to rotate it ya don’t lose fluid just a smear tighten back up ) 2nd I had to fit 34 mm spacers to move the screen forward of the clocks so the bars didn’t touch , and just move the clipons into the right position for my liking , only gripe is the bar end measure approx 16.5mm in the bore and the oem bar ends from Yamaha measure m16 so can’t use them they do come with rounded rubber bungs so I can’t use my bar end mirrors until I can decide how I’m gonna get round it by making something up at work . My opinion of the clip is is that they transform the feel of the bike into a more sport riding position but not to the point as a full on sport bike would , makes cornering better as I felt to upright to corner at speed with the oem bars ! Would highly recommend buying them
