2.5 Inch Clipon Risers (with standard 7/8" bars) 2.5 Inch Clipon Risers (with standard 7/8" bars) Woodcraft Woodcraft 3-piece split clipon risers are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are available in both 12 and 13.5 inches long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash - these risers use an inexpensive universal handlebar. These clipons have a 2.5 inch rise over a conventional race clipon. The 2.5 inch designation is not a rise over your stock clip-ons (since every stock clipon is different). This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort. Different risers can be ordered in the future if you want a higher or lower setup. Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment. Want to know how to measure for Risers? Click Here. If you have any questions please contact us at Woodcraft and we will be happy to guide you through the process for your individual motorcycle.  To see our recommendations for bars- please click the red link above the "Select Options" bar above.Spare PartsBLACK REGULAR (12") 13-4100 - QTY: 2 13-4100 12 inch (Standard) Replacement handlebar assembly- 7... 13-0100BE Bar Plug End- Large 13-0100BE2 Bar End Small BLACK XL (13.5") 13-4105 - QTY: 2 13-4105 13.5 inch (Extra Long) Replacement handlebar assembl... 13-0100BE Bar Plug End- Large 13-0100BE2 Bar End Small SILVER REGULAR (12") 13-0100 - QTY: 2 13-0100 12 inch (Standard) Replacement handlebar assembly- 7... 13-0100BE Bar Plug End- Large 13-0100BE2 Bar End Small SILVER XL (13.5") 13-0105 - QTY: 2 13-0105 13.5 inch (Extra Long) Replacement handlebar assembl... 13-0100BE Bar Plug End- Large 13-0100BE2 Bar End Small

2.5 Inch Clipon Risers (with standard 7/8" bars)

  |  
Code: 12-4535-78B
  • Prev
  • Next
2.5 Inch Clipon Risers (with standard 7/8" bars)2.5 Inch Clipon Risers (with standard 7/8" bars)
  • Prev
  • Next

Need help determining if risers will work on your bike?  CLICK HERE for a basic guide on standard risers.  We have lots of options (and different riser types) that you might not be aware of, so please don't hesitate to email or call.

$186.99
Add to Wishlist

Woodcraft 3-piece split clipon risers are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are available in both 12 and 13.5 inches long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash - these risers use an inexpensive universal handlebar.

These clipons have a 2.5 inch rise over a conventional race clipon.
The 2.5 inch designation is not a rise over your stock clip-ons (since every stock clipon is different). This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort. Different risers can be ordered in the future if you want a higher or lower setup. 

Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment. Want to know how to measure for Risers? Click Here.

If you have any questions please contact us at Woodcraft and we will be happy to guide you through the process for your individual motorcycle.  To see our recommendations for bars- please click the red link above the "Select Options" bar above.

Woodcraft 3-piece split clipon risers are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are available in both 12 and 13.5 inches long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash - these risers use an inexpensive universal handlebar.

These clipons have a 2.5 inch rise over a conventional race clipon.
The 2.5 inch designation is not a rise over your stock clip-ons (since every stock clipon is different). This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort. Different risers can be ordered in the future if you want a higher or lower setup. 

Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment. Want to know how to measure for Risers? Click Here.

If you have any questions please contact us at Woodcraft and we will be happy to guide you through the process for your individual motorcycle.  To see our recommendations for bars- please click the red link above the "Select Options" bar above.

BLACK REGULAR (12")
BLACK XL (13.5")
SILVER REGULAR (12")
SILVER XL (13.5")

Pricing

All prices, products, and terms are subject to change without notice. Orders are accepted based upon prices and terms in effect at the time of shipment. Acceptance of shipment constitutes acceptance of these terms.

Back-orders

If you’ve ordered an item that is out of stock, you will be contacted within one business day and advised of a delivery date estimate.


Payment terms

All new accounts will be set up either prepaid by credit card, Paypal, or other pre-approved arrangements. All orders will be shipped prepaid unless other arrangements have been authorized. Personal checks are not accepted. Credit card orders must be shipped to the billing address of the credit card.


Shipping

All orders will be shipped by UPS, FedEx or USPS ground unless otherwise specified. It is the responsibility of the buyer to keep Woodcraft Technologies, Inc. informed of any address changes in writing. Any charges incurred as a result of a failure of the customer to inform Woodcraft Technologies, Inc. of these changes will be the sole responsibility of the customer.


INTERNATIONAL CUSTOMERS ARE RESPONSIBLE FOR ANY APPLICABLE BROKERAGE FEES OR CUSTOMS CHARGES. Click Here to learn more about our International Shipping policy.


Returns

Woodcraft Techologies, Inc. will evaluate each return with discretion to determine the best course of action. No returns will be accepted without prior approval from a Woodcraft Technologies, Inc. employee. Returns must be accompanied with a return authorization (RA) number and must be sent back in new and saleable condition, including all product packaging. No returns will be accepted on close-out or special order items. All returns must be authorized within thirty (30) days of receipt of order.


Liability

All items sold by Woodcraft Technologies, Inc. are intended for racing use and may render some vehicles illegal for street riding in some States. The purchaser is responsible for familiarity with the local and national laws pertaining to the use of any Woodcraft Technologies, Inc. products. The purchaser of any part releases the manufacturer of those parts and Woodcraft Technologies, Inc. from all liabilities pertaining to the use of the parts. The purchaser recognizes that any modifications to any motorcycle can increase the risk of an accident and/or injury and may also render the motorcycle illegal for use on public roads. Installation of all Woodcraft Technologies, Inc. products should be performed by trained professionals.


Woodcraft Technologies, Inc.  Authorized Dealers assume full responsibility for the disclosure to the customer of all state and federal laws pertaining to the use of these products on public roads. Many Woodcraft products are designed for racing use only and it is the responsibility of the dealer to recognize the intended use of the product and advise the customer accordingly.


Warning

Installation and use of some Woodcraft Technologies, Inc. products will change the response of the motorcycle to rider control inputs. Failure of the rider to adapt to these changes may cause loss of control and serious injury or death. Improper installation and/or failure to comply with all warning and instructions may cause a loss of control and serious injury or death. Do not install or use any Woodcraft Technologies, Inc. product if you are unable to do so in compliance with all of the instructions and warnings. See the assistance of a trained professional technician.

Recommended with your purchase